What is the default state in a state machine?

3SAX V3 创作工具双语指南：状态机中的默认状态是什么

Last updated: 2026-10-21

What is the default state in a state machine?

状态机中的默认状态是什么？

In 3SAX V3's Action Group (AG), the default state is the first numbered state (frame) of a part category in the bound material group — it plays until an action unit or event moves the machine to another state.

在 3SAX V3 的动作组（AG）中，默认状态是所绑定素材组里某部件类别的第一个带编号状态（帧）——在动作单元或事件把状态机切换到其他状态前，它一直播放。

How to do it in 3SAX V3

在 3SAX V3 中怎么做

1. Open the SG panel and upload PNG parts. Set Part ID, Parent ID, baseX/baseY, Anchor X/Y, Scale, Layer, Z-perspective. Give each part a category (join) and numbered states (frames).

1. 打开 SG 面板上传 PNG 部件。设置 Part ID、Parent ID、baseX/baseY、Anchor X/Y、Scale、Layer、Z-perspective。为每个部件设置类别（join）和带编号的状态（帧）。

2. Open the AG panel and bind the material group.

2. 打开 AG 面板并绑定该素材组。

3. Add an action unit: pick the target part (join), enter a seq range like 01:0-5, then set relative rotation, scale, X/Y offsets, swap part, or trigger event.

3. 添加动作单元：选择目标部件（join），输入如 01:0-5 的 seq 范围，再设置相对旋转、缩放、X/Y 偏移、替换部件或触发事件。

4. Use "auto-suggest sequence" to generate a seq that matches the target part's available states.

4. 使用“自动建议序列”生成与目标部件可用状态匹配的 seq。

5. Trigger events from actions in the EVT panel, then chain them in the AC scheduler (AC+MUS pairs).

5. 在 EVT 面板中用动作触发事件，再在 AC 调度器中串联（AC+MUS 配对）。

6. Preview in CANVAS: drag to fine-tune dx/dy, edit rot/scale — changes sync back into the codes.

6. 在 CANVAS 预览：拖动微调 dx/dy，编辑 rot/scale——改动会同步回代码。

What you CAN and CANNOT do

你能做与不能做

CAN:

能做：

Build a state machine per part category and move states via action units and events.
Stack role tracks and camera shots on the 4-layer scheduler.
Save actions, music, schedules, and events to the server library and reload them in one click.

为每个部件类别构建状态机，并通过动作单元和事件切换状态。
在四层调度器上叠加角色轨道和镜头。
把动作、音乐、调度、事件保存到服务器库并一键重新载入。

CANNOT:

不能做：

Change the default state without editing numbered states in SG — a missing or mismatched seq shows red validation hints and the state will not advance.
Skip input validation — invalid fields are rejected with a fix example.
Render with unfilled rests — the tool asks for confirmation first, and whole-project validation returns a clickable error list.

不修改 SG 中带编号的状态就无法更改默认状态——seq 缺失或不匹配会显示红色校验提示，状态不会推进。
跳过输入校验——无效字段会被拒绝并附带修复示例。
带未填休止符渲染——工具会先要求确认，整项目校验会返回可点击的错误列表。

Try the 3SAX V3 creator tool and watch your default state drive the whole clip.

现在就试试 3SAX V3 创作工具，看默认状态如何驱动整段成片。