What does export all codes do?

导出全部代码有什么作用？

Last updated: 2026-10-21

What does export all codes do?

导出全部代码有什么作用？

Export all codes outputs the fixed-format numeric codes (64-bit) for all seven encoded panels of the current project (SG, AG, CAM, MG, AC, EVT, BONE) in one pass, so you can save the whole clip outside the tool or reuse it later.

导出全部代码会一次性输出当前项目七个编码面板（SG、AG、CAM、MG、AC、EVT、BONE）的固定格式数字代码（64 位），便于把整段片段保存到工具之外或后续复用。

How to do it in 3SAX V3

在 3SAX V3 中如何操作

1. Open your project and confirm all panels are bound (AG binds an SG, AC references valid events, BONE joints map to real parts).

1. 打开项目，确认各面板绑定完整（AG 已绑定 SG，AC 引用了有效事件，BONE 关节对应真实部件）。

2. Run whole-project validation and click each error in the list until the list is clear.

2. 执行全项目校验，逐条点击错误列表中的错误，直到列表清空。

3. Check the real-time hints beside every input; green = valid, red = error with a fix example.

3. 查看每个输入框旁的实时提示；绿色为有效，红色为错误并附修复示例。

4. Confirm the rest-fill prompt before render if it appears.

4. 如出现补休确认提示，先确认再渲染。

5. Trigger export all codes to get the static, dynamic and audio channel codes for all seven panels.

5. 触发导出全部代码，获得七个面板的静态、动态与音频通道代码。

What you CAN and CANNOT do

能做什么和不能做什么

Can:

能：

Save and reuse or extend finished clips by editing the exported code.
Load exported codes back into the matching panels.

保存已完成的片段，通过编辑导出的代码进行复用或扩展。
把导出的代码加载回对应面板。

Cannot:

不能：

Export when validation fails; the code is rejected and export stops.
Skip unbound references; missing part IDs or event pairs leave codes that will not play correctly.
Fix a broken arrangement after export; wrong parenting in SG makes parts fly apart, and that is carried into the code.

校验失败时导出；代码会被拒绝，导出中止。
跳过未绑定的引用；缺少部件 ID 或事件配对会留下无法正常播放的代码。
导出后修复错误编排；SG 父子关系设错会导致部件飞散，并原样写进代码。

Open 3SAX V3 and export your current project's codes to reuse it later.

打开 3SAX V3，导出当前项目的代码以便后续复用。