How long does it take to build a material group?

构建一个材质组需要多长时间？

Last updated: 2026-10-21

How long does it take to build a material group?

构建一个材质组需要多长时间？

A basic material group takes about 5–15 minutes; a full parent-child tree with many parts and states can take 30–60 minutes. Time depends on the number of PNG parts and states you define.

基础材质组约需 5–15 分钟；包含多个部件与状态的完整父子树约需 30–60 分钟。时间取决于你定义的 PNG 部件和状态数量。

How to do it in 3SAX V3

在 3SAX V3 中如何操作

1. Open the SG Material Group panel.

1. 打开 SG 材质组面板。

2. Upload PNG parts.

2. 上传 PNG 部件。

3. For each part set Part ID, Parent ID, baseX/baseY, Anchor X/Y, Scale, Layer, Z-perspective.

3. 为每个部件设置 Part ID、Parent ID、baseX/baseY、Anchor X/Y、Scale、Layer、Z 透视。

4. Assign a category (join) and numbered states (frames) to each part.

4. 为每个部件指定类别（join）和编号状态（帧）。

5. Use Parent ID to build the parent-child tree — check the tree as you go.

5. 用 Parent ID 构建父子树，边建边检查树结构。

6. Watch the real-time hints beside each input: green = valid, red = error with a fix example. Fill all required fields.

6. 注意每个输入旁的实时提示：绿色为有效，红色为错误并给出修正示例。填满所有必填项。

7. Validate the whole project and fix any errors in the clickable list before moving on.

7. 进行整项目校验，在可点击的错误列表中修正后再继续。

What you CAN and CANNOT do

能做与不能做

CAN: upload PNG parts, set all part fields, build parent-child trees, define categories and numbered states, reuse a saved action later.
CANNOT: skip required fields or leave invalid IDs — the code is rejected and the render fails. Wrong Parent ID or anchor values make parts fly apart in the CANVAS preview.
CANNOT: save a material group to the server library — only actions, music, schedules, and events can be saved there.

能做：上传 PNG 部件、设置全部部件字段、构建父子树、定义类别与编号状态、之后复用已保存的动作。
不能做：跳过必填项或填写无效 ID——代码会被拒绝，渲染失败。Parent ID 或锚点值错误会让部件在 CANVAS 预览中飞散。
不能做：把材质组保存到服务器库——只有动作、音乐、调度和事件可以存入。

Try the 3SAX V3 creator tool and build your first material group now.

现在就来试用 3SAX V3 创作工具，构建你的第一个材质组。