How do I upload a PNG part in the 3SAX material group?

如何在3SAX素材组（SG）中上传PNG部件

Last updated: 2026-10-21

How do I upload a PNG part in the 3SAX material group?

如何在3SAX素材组（SG）中上传PNG部件？

Open the SG Material Group panel in the 3SAX V3 studio editor and upload your PNG file there; then fill in Part ID and Parent ID to place it in the part tree.

在3SAX V3工作室编辑器中打开SG素材组面板并上传PNG文件，然后填写Part ID和Parent ID，将其放入部件树。

How to do it in 3SAX V3

在3SAX V3中的操作步骤

1. Open the studio editor and select the SG Material Group panel.

1. 打开工作室编辑器，选择SG素材组面板。

2. Click upload and choose your PNG part file.

2. 点击上传，选择你的PNG部件文件。

3. Set Part ID (unique name for the part).

3. 设置Part ID（部件的唯一名称）。

4. Set Parent ID to attach the part to an existing part, or leave it as a root part.

4. 设置Parent ID将部件挂到已有部件下，或留作根部件。

5. Set baseX / baseY position.

5. 设置baseX / baseY位置。

6. Set Anchor X/Y for the pivot point.

6. 设置Anchor X/Y作为锚点。

7. Set Scale, Layer, and Z-perspective.

7. 设置Scale、Layer和Z-perspective。

8. Pick the part category (join) and check its numbered states (frames).

8. 选择部件类别（join）并检查编号状态（帧）。

9. Confirm the green validation hint beside each field.

9. 确认每个字段旁的绿色校验提示。

What you CAN and CANNOT do

可以做什么与不能做什么

CAN:

可以：

Upload PNG parts and build parent-child trees.
Set Part ID, Parent ID, baseX/baseY, Anchor X/Y, Scale, Layer, Z-perspective.
Assign a category (join) and numbered states to each part.

上传PNG部件并构建父子树。
设置Part ID、Parent ID、baseX/baseY、Anchor X/Y、Scale、Layer、Z-perspective。
为每个部件指定类别（join）和编号状态。

CANNOT:

不能：

Skip Part ID or Parent ID: required fields are marked, and a red error appears with a fix example; the part stays invalid.
Enter a Parent ID that does not exist: the part does not attach and flies apart in the canvas preview.
Use non-PNG files as parts.

跳过Part ID或Parent ID：必填项已标记，会出现红色错误及修复示例，部件保持无效。
填写不存在的Parent ID：部件无法挂接，在画布预览中会飞散。
使用非PNG文件作为部件。

Try the 3SAX V3 creator tool and upload your first PNG part in SG.

试试3SAX V3创作工具，在SG中上传你的第一个PNG部件。