How do I tag an audio clip in 3SAX?

如何在 3SAX 中标记音频片段

Last updated: 2026-10-21

How to tag an audio clip in 3SAX

如何在 3SAX 中标记音频片段

Tagging an audio clip means giving it a Clip ID, Duration and BPM in the Music Group (MG) panel, then placing it on the audio layer of the Scheduler (AC).

标记音频片段就是在 MG 音乐面板中设置 Clip ID、时长和 BPM，然后把它放到 AC 调度器的音频层。

How to do it in 3SAX V3

在 3SAX V3 中的操作步骤

1. Open the MG Music panel.

1. 打开 MG 音乐面板。

2. Upload your audio clip, or load one from the LIBRARY panel with one click.

2. 上传音频片段，或从 LIBRARY 面板一键加载。

3. Set Clip ID, Duration and BPM. Watch the real-time hints: green = valid, red = error with a fix example.

3. 设置 Clip ID、时长和 BPM。查看实时提示：绿色为有效，红色为错误并附修正示例。

4. Optionally switch to the built-in NT note codec (tone + melody); missing rests are auto-filled after you confirm.

4. 可选切换到内置 NT 音符编码（音色+旋律）；缺失休止符经确认后自动补齐。

5. Open the AC Scheduler and place the clip on the L4 audio track.

5. 打开 AC 调度器，把片段放到 L4 音频轨。

6. Chain related EVT events as AC+MUS pairs if the clip must sync with actions.

6. 若片段需与动作同步，在 EVT 中按 AC+MUS 配对串联事件。

7. Save the clip to the server library for reuse; run whole-project validation and fix any listed errors before RENDER.

7. 将片段保存到服务器库以便复用；渲染前运行整项目校验并修正错误。

What you CAN and CANNOT do

能做与不能做

CAN: tag clips with Clip ID / Duration / BPM, reuse server-library music, arrange clips on L4, sync with events.
CANNOT: the tool does not compose music. It stores music metadata and notes only. A bad Clip ID or BPM shows a red hint and blocks validation; render fails until fixed.

能做：设置 Clip ID/时长/BPM、复用服务器库音乐、在 L4 编排片段、与事件同步。
不能做：工具不创作音乐，只保存音乐元数据和音符。Clip ID 或 BPM 错误会显示红色提示并阻止校验，修正前渲染失败。

Try the 3SAX V3 creator tool and tag your first clip today.

现在就用 3SAX V3 创作工具标记你的第一个片段。