How do I save a material group for later reuse?

如何保存材质组以便重复使用（3SAX V3 材质组 SG）

Last updated: 2026-10-21

How to save a material group for later reuse

A material group (SG) is saved with your project. To reuse it in another project, upload it to the server and load it back from the Library.

材质组（SG）随项目一起保存。要在其他项目中复用，请上传到服务器，再从资源库加载。

1. Open the SG panel. Upload your PNG parts and set Part ID, Parent ID, baseX/baseY, Anchor X/Y, Scale, Layer and Z-perspective.

1. 打开 SG 面板，上传 PNG 部件，设置 Part ID、Parent ID、baseX/baseY、Anchor X/Y、Scale、Layer 和 Z-perspective。

2. Build the parent-child tree; give each part a category (join) and numbered states.

2. 建立父子树；为每个部件设置类别（join）和编号状态。

3. Check the real-time hints beside every input: green = valid, red = error with a fix example.

3. 查看每个输入旁的实时提示：绿色为有效，红色为错误并附修正示例。

4. Save the project.

4. 保存项目。

5. Open the LIBRARY panel and save the material group to the server library.

5. 打开 LIBRARY 面板，将材质组保存到服务器资源库。

6. To reuse: open the target project, open LIBRARY, load the saved material group in one click — it appears in the SG panel.

6. 复用时：打开目标项目，进入 LIBRARY，一键加载已保存的材质组——它会出现在 SG 面板中。

CAN: save SG with the project, upload material groups to the server library, load them into the SG panel in one click.
CAN: reuse a saved SG as the base for AG, one-shot clip and render.
CANNOT: save SG from the AG, CAM, MG, AC, EVT or BONE panels — each library entry loads only into its matching panel.
CANNOT: render a project with unresolved red hints — validation stops it and lists clickable errors.
CANNOT: load a broken SG and expect clean output — bad Parent IDs make parts fly apart on canvas.

Try the 3SAX V3 creator tool and save your first material group today.

现在就用 3SAX V3 创作工具保存你的第一个材质组。