How do I fix a frame conflict warning?

如何修复帧冲突警告（动作组 AG）

Last updated: 2026-10-21

How do I fix a frame conflict warning in Action Group AG?

如何修复动作组 AG 的帧冲突警告？

A frame conflict means two or more action units in the same AG target the same part and overlap the same seq frame range. Fix it by splitting the ranges or reassigning the target part.

帧冲突是指同一 AG 中两个或多个动作单元指向同一部件，且 seq 帧范围重叠。拆分范围或改目标部件即可解决。

How to do it in 3SAX V3

在 3SAX V3 中怎么做

1. Open the AG (Action) panel and read the red hint beside the conflicting seq field (green = valid, red = error with fix example).

1. 打开 AG（动作）面板，查看冲突 seq 输入框旁的红色提示（绿色=有效，红色=错误并附修复示例）。

2. Run whole-project validation and click the conflicting AG error in the list to jump to it.

2. 运行整项目校验，点击错误列表中的 AG 冲突项直接跳转。

3. Check each action unit's target part (join) and seq range (e.g. 01:0-5). Two units on one part with overlapping frames cause the warning.

3. 检查每个动作单元的目标部件（join）与 seq 范围（如 01:0-5）。同一部件帧范围重叠即报冲突。

4. Split the ranges so they no longer overlap, or move one unit to a different part.

4. 拆分范围使其不再重叠，或把其中一个单元换到别的部件。

5. Use auto-suggest sequence to regenerate a seq that matches the target part's available states.

5. 用自动建议序列，按目标部件可用状态重新生成 seq。

6. Open CANVAS to confirm rotation, scale, dx/dy playback, then re-validate before RENDER.

6. 打开 CANVAS 确认旋转、缩放、dx/dy 播放正常，再校验后进入 RENDER。

What you CAN and CANNOT do

能做与不能做

You CAN bind one material group, edit relative rotation / scale / X-Y offsets, swap part, trigger events per unit.
You CAN save the fixed action to LIBRARY and reload it in one click.
You CANNOT leave overlapping frames on the same part — parts jitter or fly apart in CANVAS and render fails validation.
You CANNOT bypass the error by ignoring the red hint — invalid codes are rejected.

能：绑定一个素材组，逐单元设置相对旋转、缩放、X/Y 偏移、换件、触发事件。
能：把修好的动作存入 LIBRARY，一键加载。
不能：同一部件保留重叠帧——CANVAS 中部件抖动或飞散，渲染校验失败。
不能：无视红色提示强行继续——无效代码会被拒绝。

Try it now in the 3SAX V3 creator tool and clear your AG conflicts in minutes.

现在就在 3SAX V3 创作工具中试试，几分钟清除 AG 冲突。