How do I export an event with its group codes?

如何导出带组码的事件

Last updated: 2026-10-21

How do I export an event with its group codes?

如何导出带组码的事件？

Create the event in the EVT panel, link it from an action or scheduler slot, then export the scheduler codes — the event's group codes travel with the EVT and AC output.

在 EVT 面板创建事件，从动作或调度槽位关联它，然后导出调度器代码——事件的组码随 EVT 与 AC 输出一起导出。

How to do it in 3SAX V3

在 3SAX V3 中怎么做

1. Open the EVT panel and create an event; fill the required fields until the hints turn green.

1. 打开 EVT 面板创建事件，填写必填项直到提示变绿。

2. In the AG panel, add an action unit and set its trigger event to that event.

2. 在 AG 面板添加动作单元，把触发事件设为该事件。

3. In the AC scheduler, place the event as an AC+MUS pair on the timeline.

3. 在 AC 调度器中把事件作为 AC+MUS 对放入时间线。

4. Export the scheduler codes; the event's group codes are included in the EVT/AC output.

4. 导出调度器代码，事件的组码包含在 EVT/AC 输出中。

5. Optional: save the event to LIBRARY and reload it into the EVT panel to reuse the same codes.

5. 可选：把事件存到 LIBRARY，再一键载回 EVT 面板复用同一组码。

What you CAN and CANNOT do

能做什么与不能做什么

CAN: trigger an event from an action, chain events in the scheduler, save and reload events via LIBRARY, export scheduler codes.
CANNOT: export an event on its own without linking it to an action or scheduler slot; invent group codes outside the codec format.
Wrong input shows a red hint with a fix example; unresolved errors appear in the whole-project validation list and block render.

能：从动作触发事件、在调度器中串联事件、通过 LIBRARY 保存与载入事件、导出调度器代码。
不能：不经动作或调度槽位单独导出事件；编造编码格式之外的组码。
输入错误时显示红色提示与修正示例；未解决的错误进入整项目校验列表并阻止渲染。

Try it now in the 3SAX V3 creator tool.

现在就在 3SAX V3 创作工具里试试吧。