How do I create an action group in 3SAX?

如何在3SAX中创建动作组（AG）

Last updated: 2026-10-21

How to create an action group in 3SAX

An action group (AG) binds a material group and holds action units that drive parts through a state machine. You build it entirely in the AG panel.

动作组（AG）绑定一个材质组，存放驱动部件运转状态机的动作单元。全部在AG面板中搭建。

1. Open the AG Action panel.

1. 打开AG Action面板。

2. Bind an existing Material Group (SG).

2. 绑定一个已有的材质组（SG）。

3. Add an action unit; set the target part (join).

3. 添加动作单元，设置目标部件（join）。

4. Enter seq frame ranges (e.g. 01:0-5).

4. 输入seq帧区间（如01:0-5）。

5. Set relative rotation, scale, X/Y offsets, swap part, and trigger event as needed.

5. 按需设置相对旋转、缩放、X/Y偏移、替换部件、触发事件。

6. Use auto-suggest sequence to generate a seq matching the target part's available states.

6. 使用“自动建议序列”生成与目标部件可用状态匹配的seq。

7. Check the validation hints (green = valid, red = error + fix example).

7. 查看校验提示（绿色=有效，红色=错误并附修正示例）。

8. Preview on CANVAS; drag to fine-tune dx/dy, edit rot/scale — changes sync back into the codes.

8. 在CANVAS预览；拖动微调dx/dy，编辑rot/scale，改动会同步回代码。

9. Save the AG to the server LIBRARY for one-click reuse.

9. 将AG保存到服务器LIBRARY，一键复用。

CAN: chain units into a state machine, trigger EVT events from actions, reuse AGs from the library, preview and adjust on canvas.
CANNOT: build an AG without a bound material group, or reference frames that don't exist — the code is rejected and validation flags the error; mismatched parts fly apart in preview.

Try it now in the 3SAX V3 creator tool.

现在就在3SAX V3创作工具中试试吧。