How do I copy an action group to another material group?

如何将动作组复制到另一个材质组？

Last updated: 2026-10-21

Direct answer

直接回答

An Action Group (AG) is bound to one material group, so you cannot copy it in place — reuse it by saving the action to the LIBRARY and loading it into an AG bound to the other material group.

动作组（AG）绑定一个材质组，无法原位复制——要把动作存入 LIBRARY，再加载到绑定另一个材质组的 AG 中复用。

How to do it in 3SAX V3

在 3SAX V3 中如何操作

1. Open the AG panel and select the action group you want to copy.

1. 打开 AG 面板，选中要复制的动作组。

2. Save it to the server: LIBRARY panel → save this action.

2. 存入服务器：LIBRARY 面板 → 保存该动作。

3. Switch to the material group (SG panel) you want to animate.

3. 切换到要动画的材质组（SG 面板）。

4. Open the AG panel, create or select an AG, and bind it to the new material group.

4. 打开 AG 面板，新建或选择 AG，并绑定新的材质组。

5. In LIBRARY, click the saved action to load it into this AG.

5. 在 LIBRARY 中点击已保存的动作，加载到该 AG。

6. Check the seq frame ranges. Target parts and states differ between material groups, so use auto-suggest sequence to rebuild a seq matching each target part's available states.

6. 检查 seq 帧区间。不同材质组的目标部件与状态不同，用自动建议序列按各目标部件的可用状态重建 seq。

7. Re-link event triggers if the original action fired EVT events.

7. 若原动作触发了 EVT 事件，重新关联事件触发。

8. Preview in CANVAS, then run whole-project validation.

8. 在 CANVAS 预览，然后执行整项目校验。

What you CAN and CANNOT do

能做与不能做

CAN: save actions to the server library and load them into any AG in one click.
CAN: rebind an AG to another material group and rebuild seqs with auto-suggest.
CANNOT: copy an AG across material groups in place — the AG stays bound to its original material group.
Wrong target part: the action points to a join that does not exist in the new group, so validation flags a red error and the preview breaks.

能：把动作存入服务器库，一键加载到任意 AG。
能：将 AG 重新绑定到另一个材质组，并用自动建议重建 seq。
不能：跨材质组原位复制 AG——AG 仍绑定原材质组。
目标部件写错：动作指向新组中不存在的 join，校验会报红错，预览异常。

Try it in the 3SAX V3 creator tool and reuse your best actions across material groups.

在 3SAX V3 创作工具中试试，把你的好动作用于多个材质组。