How do I align two parts side by side?

如何在3SAX V3中将两个部件并排对齐

Last updated: 2026-10-21

How do I align two parts side by side?

如何在3SAX V3中将两个部件并排对齐?

Set both parts to the same parent and use baseX/baseY plus Anchor X/Y in the SG Material Group panel; horizontal alignment comes from matching baseY, vertical from matching baseX.

在SG素材组面板中把两个部件设为同一父级，用baseX/baseY配合Anchor X/Y对齐；水平并排靠相同baseY，垂直靠相同baseX。

How to do it in 3SAX V3

在3SAX V3中的操作步骤

1. Open the SG Material Group panel and upload both PNG parts.

1. 打开SG素材组面板，上传两个PNG部件。

2. Set the same Parent ID for both parts so they share one coordinate frame.

2. 给两个部件设置相同Parent ID，使其共享同一坐标系。

3. Give each a unique Part ID and keep their category (join) consistent.

3. 分别设置唯一的Part ID，并保持category（join）一致。

4. Set equal baseY on both parts for side-by-side alignment; set baseX so they do not overlap.

4. 两个部件设置相同baseY实现并排；设置baseX使二者不重叠。

5. Set identical Anchor X/Y on both parts so their pivot points match.

5. 两个部件设置相同的Anchor X/Y，使枢轴点一致。

6. Adjust Scale, Layer and Z-perspective per part; keep Layer values ordered as intended.

6. 按需调整Scale、Layer和Z-perspective，保持Layer顺序符合预期。

7. Open CANVAS to preview; drag a part to fine-tune dx/dy, edit rot/scale — changes sync back into the codes.

7. 打开CANVAS预览，拖动部件微调dx/dy、编辑rot/scale，改动会同步回代码。

8. Check the green/red hints beside each input before saving the project.

8. 保存项目前查看每个输入框旁的绿/红提示。

What you CAN and CANNOT do

可以做什么与不能做什么

CAN:

可以：

Align parts through shared Parent ID and matched baseY / Anchor X/Y.
Fine-tune offsets visually in CANVAS and sync them back to codes.
Bind parts to BONE joints so aligned parts move together.

通过共享Parent ID与匹配的baseY/Anchor X/Y对齐部件。
在CANVAS中可视化微调偏移并同步回代码。
将部件绑定到BONE骨骼关节，让对齐的部件一起运动。

CANNOT:

不可以：

Align parts with no shared reference — different parents or mismatched Anchors make parts fly apart at render.
Skip validation — wrong baseX/baseY or missing required fields leave red hints and block a clean render.
Expect the tool to auto-place parts; one-shot clip arranges actions, not part alignment.

无共享基准对齐部件——父级不同或Anchor不匹配，渲染时部件会飞散。
跳过校验——baseX/baseY错误或必填项缺失会留下红色提示并阻碍正常渲染。
期望工具自动摆放部件；一句话成片编排的是动作，不是部件对齐。

Open the 3SAX V3 creator tool and try aligning a two-part group now.

现在打开3SAX V3创作工具，试着对齐一个双部件组吧。