How do I add background music to my 3SAX scene?

如何为 3SAX 场景添加背景音乐

Last updated: 2026-10-21

How to add background music to your 3SAX scene

如何为 3SAX 场景添加背景音乐

Background music in 3SAX V3 is metadata only: you upload audio clips or note codes in the Music Group (MG) panel and place them on the audio layer (L4) in the Scheduler.

3SAX V3 的背景音乐只是元数据：在 MG（音乐组）面板上传音频片段或音符代码，再在 AC（调度器）的音频层 L4 上放置。

How to do it in 3SAX V3

在 3SAX V3 中的操作步骤

1. Open the MG (Music Group) panel.

1. 打开 MG（音乐组）面板。

2. Upload an audio clip and set Clip ID, Duration, BPM. Or use the built-in NT note codec: enter tone + melody; missing rests are auto-filled after you confirm.

2. 上传音频片段并设置 Clip ID、时长、BPM。或使用内置 NT 音符编解码：输入音色 + 旋律，缺失休止符经确认后自动填充。

3. Check that the green hint shows beside each field; fix any red field before moving on.

3. 检查每个输入框旁的绿色提示；红色字段需先修正再继续。

4. Open the AC (Scheduler) panel and place the clip on the audio layer L4 against your timeline.

4. 打开 AC（调度器）面板，把片段放到时间线的音频层 L4 上。

5. To trigger music in a chain, create an event in EVT and link it as an AC+MUS pair in the scheduler.

5. 若需事件触发音乐，在 EVT 中创建事件，并在调度器中以 AC+MUS 配对链接。

6. Preview timing in CANVAS, then render to MP4 (720x1280 or 1280x720).

6. 在 CANVAS 中预览时序，然后渲染为 MP4（720x1280 或 1280x720）。

What you CAN and CANNOT do

可以做什么、不能做什么

CAN: upload audio, store note codes, set BPM/duration, place music on L4, chain it with events, save music to the LIBRARY for one-click reuse.
CANNOT: the tool does not compose music by itself, does not generate saxophone sounds or instruments, and has no AI song generator. If you leave a required field red, rest-fill confirmation blocks render; whole-project validation lists the error when you click it.

可以：上传音频、存储音符代码、设置 BPM/时长、把音乐放到 L4、与事件链式触发、把音乐存入 LIBRARY 一键复用。
不能：工具不会自行作曲，不会生成萨克斯音色或乐器，也没有 AI 歌曲生成器。若必填字段为红色，休止符填充确认会阻止渲染；点击整项目校验可列出错误项。

Try the 3SAX V3 creator tool and add your first track today.

现在就用 3SAX V3 创作工具添加你的第一条音轨吧。